Friday, June 26, 2009

Strap Clips and Attachments for attaching your ID Badge


There are all different ways you can wear and display your employee ID badge. Some people use lanyards which are worn around the neck, some people use badge reels which are usually attached to a shirt or pant pocket and extend to card readers, the most popular way to wear your ID badge is using a strap clip or pin attachment its also the least expensive.

We carry all different styles of strap clips and badge attachments.

Steel Clips
Plastic Clips
Pressure-Sensitive Clips
Glue on Clips
Pins
Magnet Sets and More!

Strap Clip and Badge Attachments Catalog

The catalog above is rendered in Adobe Acrobat .pdf format. If you do not have the Adobe Acrobat Reader, please visit www.adobe.com for a free download.

Thursday, June 25, 2009

Military Badge Holders


The US Military frequently uses card dispensers to hold their ID Cards. Some Government issued ID cards called TWIC cards require a special type of holder that are FIPS201 approved but aside from those special cards there are a few card dispensers that are widely used by the Military.

Depending on how many cards you use there are different options.

Card Dispensers are closed on both sides and are usually frosted with a UV Protective Finish.

Single Card Holders for Military and Government
HD-20A Vertical Card Dispenser with Thumbnotch
HD-20B Vertical Card Dispenser with Slide Ejector
HD-204 Horizontal Card Dispenser with Slide Ejector

Dual Side Card Holders for Military and Government
HD-20C Vertical Dual Card Dispenser with Thumbnotch
HD-205 Horizontal Dual Card Dispenser with Slide Ejectors

Popular Card Dispensers ordered by the Government


We stock all different styles of badge holders but there are two really popular holders that are ordered in high qtys all the time by the US government and Military.

The HD-20A badge dispenser is a hard plastic case that is frosted in color and is closed on both sides. This holder holds one ID card. The HD-20C badge dispenser is a made of the same material as the holder above but it holds two ID cards, one on each side. Both card holders have thumb notches so you can easily remove your card and they also have a slot so you can attach a badge reel, Id strap or lanyard.

Wednesday, June 24, 2009

PDF Catalogs - More badge supplies offered!


Security Imaging Corporation
Offering products & services that contribute to a safer work place

06/2009

Greetings!

Security Imaging provides ID products that contribute to a safer work place. We sell ID badges, ID card printers, Badge Supplies, Signs, Metal Detectors and more! Because we offer such a wide range of products we do not offer everything online.

Below you can find our Catalogs available in .pdf format that you can download and save to your desktop. We also have products available on our Website. If there is a product you are looking for and can't find it in one of our catalogs please contact us at 1-877-369-7033 and we would be happy to provide a custom quote.

The catalogs below are rendered in Adobe Acrobat .pdf format. If you do not have the Adobe Acrobat Reader, please visit www.adobe.com for a free download. To start the download please click on the blue links below, there is a total of 5 catalogs.

All ID Products Catalog
Security ID Products Catalog
Available and Ready for Fast Ship

We have two catalogs that have all ID card products, lanyards, badge reels, ID card printers, slot punches, lamination supplies, PVC Cards and more.

Some of the items you can find online or you can call us and we can give you further assistance. Most items in our catalogs are available for fast ship and usually ship the same day.
KeyBak Catalog
Made in the USA

Keybak Manufacturing company has been manufacturing key reels and self retracting reels for over 60 years.

The first KeyBak key reel was made for switchmen and brakeman working on the railroad, they needed a safer, more convenient way to handle their keys. Today KeyBak continues to fill the need of key reels for all types of industries - Manufacturing light industrial tool retractors to keep quality control gages at their proper work station, sport retractors to secure your fishing gear and more!
Bulk Badge Reel Catalog
Made Overseas

The Badge Reel Catalog has multiple different styles of badge reels that you may not find online.
Most of the reels in the catalog need to be ordered in higher Quantities and may have longer delivery time frames.

The badge reels you see in this catalog can be customized with a label or laser engraved. For more information or a custom quote please call us at 1-877-369-7033.
TempBadge Catalog
Temporary ID for Visitor Management/Time Expiring Badges

Tempbadge id badges are time expiring badges that expire in 4 different time frames - 1/2 day, 1 day, 1 week and 1 month. These expiring badges are designed to help identify visitors, contractors and temporary workers.

Everyone that enters your building should wear an Identification badge. Permanent employees are usually issued access control badges or hard PVC badges, but what happens when visitors come to your location?

Tempbadge id products are a great solution! The time expiring badges are low costs and easy to issue.
If you had issues downloading the .pdf catalogs you can copy and paste the following urls into your web browser to start the download.

2009 Security ID Products Catalog
http://www.securityimaging.com/uploads/files/PDFS/IDProducts_2009.pdf
ID products Catalog
http://www.securityimaging.com/uploads/files/PDFS/Security_Imaging_Catalog.pdf
KeyBak Badge Industrial Badge Reels Catalog Made in the USA
http://www.securityimaging.com/uploads/files/PDFS/KeyBak2009.pdf
Overseas Badge Reel Catalog for Bulk Order Badge Reels
http://www.securityimaging.com/uploads/files/PDFS/SecurityImaging-Reels.pdf
Tempbadge Catalog
http://www.securityimaging.com/uploads/files/PDFS/Tempbadge.pdf

Thank you for taking the time to download our Catalogs. Please contact us for pricing and availability or with any questions you may have.

Sincerely,


Emily Dick
Security Imaging Corporation
1-877-369-7033




Security Imaging Corporation | 9616 Roosevelt Way NE | Seattle | WA | 98115

Tuesday, June 23, 2009

Custom PVC Cards - Loyalty Cards, Membership Cards, Library Cards



The Promotional PVC Card is gaining popularity. You see PVC Cards being used as membership cards, loyalty cards, library cards, frequent customer cards, gift cards, phone cards and more!

We offer competitive pricing on all types of customized cards. Email us your art file and request a custom quote today.

Print Methods:
Screen Printing
Surface Offset Printing
Laminated Offset Printing
Hot/Foil Stamping

Options:
Signature Panels
Magnetic Stripe
Personalization
Barcodes, Embossing, Numbering
Notches, Holes, Scoring
Cards Affixed to Forms

For More information please ask for Emily at 1-877-369-7033.

Promotional Lanyards - Customized Neck Cords for wearing your ID


One of the most common used methods of sales promotion is the promotional product. Products labeled with your brand or company name serve as reminders of your product/service.

Customized ID products
can help your company:

* Build Product Awareness
* Create Interest
* Provide Information
* Stimulate Demand
* Reinforce your Brand

Security Imaging offers a full line of products that can be customized with your company name or logo. Brand Recognition is a great way to keep people using your product or service. Why not have your employees promote your business while wearing their ID badge?
Customize lanyards, badge reels, wristbands and even badge holders.

No Twist Badge Reels - Keep your ID Facing Forward



Is your ID always facing the wrong way? Does your badge twist around? Security Imaging offers twist free and no twist badge reels.

Our twist free badge reels are made by Keybak and made in the USA. Tested at 180,000 pulls the twist free badge reel is made to last! The plastic strap at the bottom of the badge reel allows you to insert your card, once snapped together the Twist Free badge reel will keep your ID facing forward for everyone to see!

We also have No Twist Carabiner badge reels that have a special "U-Shaped" bullet that snaps into place and keeps your badge from twisting.

Both twist free and no twist badge reels can be customized with your company name or logo.

Card dispensers - Government and Military’s favorite ID card holder


ID Card dispensers are made from a custom mold that is injected with plastic. ID Card Dispensers are made to with stand harsh work and weather environments and some of the card dispensers offer UV protection. ID Card Dispensers are usually closed on both sides with some type of thumb notch or ejector.

There are many styles of ID card dispensers that will protect your TWIC Credentials, FIPS Credentials or your HID Access Control Card.

Card dispensers come in vertical and horizontal formats and have a place to attach a lanyard, badge reel or strap clip. Security Imaging offers card dispensers that have a thumb cut out or a slide ejector so you can remove your card quick and easy.

TWIC cards are issued by the government and hold personal information about the card holder such as their finger prints, photo, name, DOB etc. For those who need to protect their TWIC credential from possible theft there are badge holders that include a thin piece of metal which protect the stored information from being pfished or scanned.

We stock many different styles of badge dispensers but there are a few that are extremley popular with the Military and Government

The HD-20A is a single card dispenser that is frosted with UV protection. It also has a thumb notch so you can slide the card up for easy removal. The HD-20A Card Dispenser is one of the most popular badge holders used by the US Military.

The HD-20C is the dual side version of the HD-20A. The HD-20C Card Dispenser holds two cards, one card on each side. In the center of the two card dispenser are plastic ridges that separate the two cards. The holder is closed on all sides and is top loading.

Thursday, June 18, 2009

Green Badge Holders - Earth Friendly badge supplies


Security Imaging is now offering Earth Friendly badge holders that can be Recycled.

Security Imaging is a Seattle based company that specializes in ID badge supplies. Because the Pacific Northwest is big on going green we have decided to offer some Earth Friendly ID products that are made from Recycled or Biodegradable products.

Eco-Friendly Badge Holders
Durable and Environmentally Friendly
*ROHS Compliant (Restriction of Hazardous Substances) It does not contain components that will contaminate or pollute the enviornment.
* Phathalate Free and resistant to UV rays

If you would like a sample or to place an order please call 1-877-369-7033

Security Imaging Part#'s
PART#UH-10A Vertical Holder
PART#UH-101 Horizontal Holder

KeyBak offers new Compact Carabiner Retractor



KeyBak Model#6 Mid Size All Purpose Carabiner Retractor

Made in the USA.

The Model #6 Carabiner Retractor has a 36" long nylon cord that allows you to extend your keys, ID card, flash light or small device and then it retracts back when released. Made of a tough 1 3/4" poly carbonate case the carabiner retractor is made to last.

Easily attach the carabiner to your belt loop for easy access.

Wednesday, June 17, 2009

FIPS201 Approved Badge Holders for TWIC cards and Government Issued ID



Have you heard about FIPS201? How about TWIC cards issued by the Federal Government?

TWIC stands for Transportation Worker Identification Card.

TWIC cards are government issued ID Cards that store multiple types of information such as finger prints, back ground checks, photos and more. In order to protect these cards from being damaged, lost or pfished the government has approved specific ID badge holders to help protect the information that is stored on the ID Cards.

Security Imaging has many different styles of TWIC card holders that will protect your information and all of them have been FIPS201 approved by the Government. Purchase TWIC badge holders or to receive a sample please contact us at 1-877-369-7033.

Here is a link and information for those ready to start the process of ordering a TWIC ID Credential.
In this time of heightened security, all transportation workers need to become informed about the Transportation Worker Identification Credential (TWIC). You will need a TWIC to gain unescorted access to secure areas of Maritime Transportation Security Act (MTSA) regulated facilities and vessels.

Here you can learn about the TWIC program and how to:

Apply for a TWIC
Find an enrollment center
Schedule an appointment
Pre-enroll
To pre-enroll you must first Register for an ID.

If you have already registered for your ID click here to login.

The TWIC FAQs page provides answers to many of your questions.

TWIC is an important part of the Transportation Security Administration's efforts to improve security in the Nation's transportation system. We appreciate your cooperation in helping to make America a safer place to work and live.

Learn about TWIC
TWIC FAQs
TWIC Website

Security Imaging Corp supplies all the badge holders to protect your TWIC ID Credential.

Badge holders added protection!


Badge Holders help protect the electronics in HID proximity-access cards.
With the high cost of replacing your proximity badge or FIPS Twic id credentials we always suggest the use of a badge holder or ID card dispenser. The most ordered badge holder for keeping dirt away from your access cards are Zipper badge holders made of flexible vinyl.
Card dispensers are made of tough hard plastic and will keep your credentials clean and not allow card to bend is also a top seller.

Contact: Security Imaging 877-369-7033

Searches related to: Badge Holders
Retractable badge holders
Arm badge holders
Badge lanyards

Flashing LED badge reel retractor


A customer called and said they had received a flashing badge reel from a trade show that when you pull on the cord it lights up. I said to him that we sell them. He then asked could our company logo be added for a promotional giveaway and I said not a problem.
Badge reels for promoting your company or event is a product that will get used every time the wearer enters a building.
Take a chance! Purchase badge reels for your next trade show giveaway.
Contact: Security Imaging 877-369-7033

Searches related to: badge reels
Badge holder lanyards
Heavy duty badge reel
Retractable badge holders
Plastic badge holders
Badge belt clips
Carabiner badge reel
Badge retractor

Pre-Printed Customized Badge Reels

Security Imaging Now offers Badge Reels that are customized with a pre-printed label. Show your pride in your profession by sporting a badge reel geared toward your line of work.



Dental Office Badge Reels
Your choice of a a toothbrush badge reel or tooth badge reel

Medical Office Badge Reels
Now available with a Cadeceus, Stethescope or Nurses Hat

Justice Badge Reels
Preprinted Badge Reel with the Scales of Justice

Patriotic Badge Reels
Show your Patriotic Side by sporting an American Flag Badge Reel

Awareness Badge Reels
Preprinted Breast Cancer Ribbon Badge Reels, Pink Heart breast Cancer Badge Reels

We also have many more styles such as smiley face badge reels, apple badge reels, golf ball badge reels and more!

Badge Reels - Popular in the restaurants


Badge Reels have become a popular choice for those working in the restaurant industry. Most restaurant employees now swipe a card before entering the customers order. Badge retractors help keep the badge/card close to your body for easy access and swiping.
For people who work for Applebee's they even make a badge reel in the shape of an apple. For food services located in airports there is a badge retractor in the shape of an air plane.
Other industries have a retractable reel that let's people know what products they sell. If you work for a company like "Discount Tire, Goodyear, Goodrich, or Firestone there is a badge reel in the shape of a tire.
Other retractor shapes include: Light bulb, Bottle openers, Lanyard retractors, Pencil retractors, Dress, Baseball mitt, Bottle top,
Heart, Golf Ball and more.
Contact Info: Security Imaging 877-369-7033

Tuesday, June 16, 2009

Security Imaging Catalogs

Security Imaging has multiple product catalogs. Here you can find our Catalogs available in .pdf format that you can download and save to your desktop. We also have more products available on our website. The catalogs below are rendered in Adobe Acrobat .pdf format. If you do not have the Adobe Acrobat Reader, please visit www.adobe.com for a free download.

Catalogs:
ID products Catalog 2009
Lanyards, Badge Holders, Lamination Supplies and more!
2009 Security ID Products Catalog
Lanyards, Badge Holders, Badge Reels, Printers and more!
Overseas Badge Reels
For Bulk Ordering of Badge Reels
Keybak Industrial Badge Reels
Made in the USA
Tempbadge Products
Visitor Management Products that time expire

Tool - Key & Chuck Retractors



Key-Bak manufactures tool retractors that attach to a commercial drill, CNC, Gun drill, and other industrial equipment.
If your machine shop has the need to keep your chucks, wrenches, screw drivers and specialty tools attached for easy access then these key-bak products are what your looking for.

For information on this product contact:
Security Imaging Corp
877-369-7033

Friday, June 12, 2009

Bulk Order Badge Reels from Security Imaging

Now you can bulk order badge reels from Security Imaging. Our overseas badge reels are priced to sell and must be ordered in Bulk. Most overseas orders take about 3 months to arrive however you can pay additional costs to receive them sooner.

There are many different styles of badge retractors to choose from such as metal case reels, plastic case badge reels, cell phone badge reels and more.

You can download the full Badge Reel Catalog in.pdf format:
Badge Retractor Catalog

Keybak Badge Reels


Keybak Manufacturing company has been manufacturing key reels and self retracting reels for over 60 years.

The first KeyBak key reel was made for switchmen and brakeman working on the railroad, they needed a safer, more convenient way to handle their keys. Today KeyBak continues to fill the need of key reels for all types of industries - Manufacturing light industrial tool retractors to keep quality control gages at their proper work station, sport retractors to secure your fishing gear and more!

You can download the full Keybak Catalog in.pdf format:
Keybak Badge Retractor Catalog

Tuesday, June 9, 2009

Badge Reels - So Many different End Fittings and Back Pieces

Badge reels are used in so many different industries for different applications its no wonder why badge reels come in so many different styles with different end pieces and back pieces.

End Fittings
Strap Badge Reels
Split Rings Badge Reels
Card Clamp Badge Reels
Plastic Clamp Badge Reels
Pen/Pencil Grip Badge Reels
Twist Free Badge Reels

Back Pieces
Slide Back Badge Reels
Swivel Clip Badge Reels
Alligator Clip Badge Reels
Pin Badge Reels

If you need help finding the right solution for your company please call 1-877-369-7033 and we would be happy to help!

Thursday, June 4, 2009

Security Imaging sponsors Molly Helmuth Racing


Security Imaging would like to wish Molly Helmuth a great Gold Cup weekend were Molly will be competing in Canada against the best drivers in the Rotax kart series.
The Rotax racing karts can reach a speed of 60 to 70 miles per hour and shifter karts can reach a top speed of over 100 mph.
Molly Helmuth is sponsored by:
"Molly Helmuth racing is always looking for more sponsors."

Friday, May 29, 2009

Promotional Badge Reels "Add your company logo"


Promotional badge reels are a great giveaway for potential customers at trade shows or conventions. Badge reels are used by employees many times a day to enter buildings across the US and planet. A custom badge reel with your company logo gets touched many times during the day.
Custom Badge Retractors "A great way to promote your company"

Security Imaging can help design a custom badge reel that will get you noticed! 
Contact: Security Imaging 877-369-7033

Mini-Bak badge reel exposed...


Mini-Bak reels are made in the USA and built to last.
I have taken this minibak reel a part to show you the quality engineering of this product. The spring is made of stainless steel to give maximum pull. The reels have been tested in a lab up to 180,000 pulls. If your looking for the best badge reel in the market today the Mini-Bak is the #1 choice.
Contact: Security Imaging 877-369-7033

KeyBak speciality retracting reels


Key-Bak makes many retractable reels for carrying your keys or special items.
Security Imaging has been selling Key-Bak, Mini-Bak products for many years. If your looking for the best badge/key retractors
available key-bak products are second to none.
Key-Bak virtual catalog will be available soon.
Contact: Security Imaging 877-369-7033

Badge Reels come in so many colors & styles...


Security Imaging has the largest supply of badge reels on the web. But with that said there are many more choices of styles and colors we do not stock. We will soon post a link to a virtual catalog that shows all of the retractable badge reels that are available.
Contact: Security Imaging 877-369-7033

Wednesday, May 20, 2009

Badge Holders - Lanyards - Badge Reels - ID Badge Resource

Security Imaging is one of the largest suppliers of id badge holders on the net. If your business is looking for large amounts of badge holders, lanyards, retractable reels or ID equipment give us a call and we will gladly send you a free estimate for all your product needs.
ID Resellers welcome.....

Friday, May 8, 2009

Security Imaging Corp shipping department

A short video clip showing Security Imaging Corp shipping department. 
Lanyards, Badge holders, Badge Reels, and Photo ID systems ship today.

Wednesday, May 6, 2009

KeyBak MiniBak Corp - Badge Reels made with quality materials

Security Imaging sells all KeyBak Products - 877-369-7033

Original KEY-BAK "made in USA" self retracting key reel was invented by the founder of our company in 1948. Russ Lummis saw the need for railroad switchmen to have a safer way to carry their keys. Dangling key chains could catch as they mounted and dismounted moving rail cars to attend to their duties. Mr. Lummis' story is one of American ingenuity and entrepreneurial spirit. The product and industry he started in his garage in Pasadena, California is internationally recognized and one we think he would be proud.

KeyBak quickly grew out of Mr. Lummis' garage but stayed within Pasadena, at the center of the high tech industry of the day; aerospace. With nearby Caltech, NASA Jet Propulsion Laboratories and major aerospace manufacturers West Coast Chain Mfg. Co. (WCC) had access to the best engineering, tooling and materials available. This proximity led to an early adoption of technology and a rapid improvement of the original self retracting key reel from a garage built and designed product to a high quality product engineered with the best materials available anywhere in the world.

By 1985 WCC had outgrown its facilities in Pasadena and moved 40 miles east to Ontario, California following a workforce out priced by the rapidly escalating housing prices nearer to Los Angeles. Ontario is a major transportation hub with convenient access to one of the busiest ports in the world, United Parcel Service's second largest US hub located at the Ontario International Airport within 5 miles of our factory, two major interstate highways and railroads. While technology has allowed business to be efficiently transacted anywhere in the world it's a fact that proximity to transportation is a requirement for efficient trade of goods and manufacturing.

We are proud of our history and work to keep the tenets learned over the past 6 decades close; ingenuity, entrepreneurial spirit, adoption of technology, high quality and efficient trade of goods and manufacturing. It is with these principals we look forward to serving you.

Security Imaging sells all KeyBak Products - 877-369-7033


MiniBak Badge Reels - Mnf by KeyBak


Mini-Bak Badge reels manufactured by Key-Bak are the best quality and longest lasting reel in the market. The Stainless spring is 8 inches longer than the economy reels, that makes for better pull. The Minibak reel is also made in the USA. Tested to 180,000 pulls. These badge reels have many different end fitting options for multiple purposes such a Card Clamp, Flex Hook,Split Ring, and Twist Free.

Security Imaging sell all  products made by Key-Bak. Please call for prices. 877-369-7033

Carabiner Badge Reels

Carabiner Badge Reels are a great way to hold your HID access badge credentials. The pressure release latch at the top of the reel attaches to a belt loop and allows the reel to point in the direction that the card is pulled, saving wear on the cord.

Contact: Security Imaging 877-369-7033

Unique shaped badge reels

Security Imaging stocks Badge Reels that have unique shapes and are also available with labels. We stock

Star, Heart, Golf Ball, Dual Reels and more. We also stock pre-printed badge reels that have Medical Imprints, Religious Imprints, Smiley Faces etc.
Contact: Security Imaging 877-369-7033

Badge Reels are so popular...


Badge reels come in many styles, colors, shapes and quality. They are used for carrying HID access control cards, keys, ID cards and much more. With a pull of the cord the reel extends out to the access control reader then retracts. There are two grades of reels, Quality grade that is made in the USA and Economy grade that is made overseas. Both badge reels work well but in testing the USA made MiniBak brand last longer but cost more. Security Imaging works directly with the manufacture to make sure they are the best quality in the industry. If you dont see the retractable reel your looking for give us a call and will help you find it. 

Monday, May 4, 2009

Security Imaging creates a new Custom Products Website
Construction is still underway but you can still find pricing and product information. We hope to have the new site complete by the end of May. If you have questions or feedback please call us at 1-877-369-7033.

ID Custom Products
Find all the information you need on customizing your ID badge holder, badge reel, lanyard, wristband and more!

Check out the new site (Photos will be uploaded later this week.)

IDcustomproducts.com
To provide products that identify and secure your business or event.

Biodegradable Plastic Cards!

Security Imaging is now selling "Green PVC Cards"
For more info or pricing call: 877-369-7033
For several years BIOPVC, INC. have been researching and testing an environmentally friendly solution for the rigid PVC market. The result is a 99% PVC product that biodegrades in nine months to five years in soil, water, compost or wherever in continual contact with microorganisms. The bioremediation works in an aerobic or anaerobic environment. BIOPVC, INC. has a patent pending on the BIOPVC™ product.

Wednesday, April 22, 2009

Molly Helmuth promotes Security Imaging and other sponsors




Molly Helmuth has started a new race season competing in the NW Gold Cup Rotax. This is Molly's third season and she is now competing against the best in her class. Molly Helmuth is always looking for more sponsors. 
If you would like to help
contact: Mike Helmuth 206-819-1501

Thank you to these companies supporting Molly Helmuth Racing.

Amy Helmuth
And a shout out to all those families and venders who help Molly at the track. Thank you....
You tube video - Molly Helmuth #92 takes a spin!

Wednesday, April 8, 2009

"Congrats" Amy Helmuth

Amy Helmuth,
Security Imaging staff would like to say how proud we are of you for getting your music listed on itunes, amazon and more.
The world now can purchase your great music.
Keep following dream!

Monday, March 30, 2009

MyID.is Now In Public Beta, Aims To Become The Digital Certification Standard

Digital certification platform MyID.is is taking a crack at offering a way for people to claim their real identity online, in order to be able to prevent ID theft and to verify content they publish on their blogs, social networking accounts, photo & video sharing sites, and so on.

Additionally, the site offers (yet another) way to manage your online identity and doubles as a certified OpenID provider. The site has been in alpha testing for the past 8 months and as of yesterday entered into public beta.

This is how it works: you register for a MyID.is Certified account on the website, and enter your personal details, which are later verified by the team (I’ll get to the issues with this later). They do this by cross-checking the name you submitted with the one on your credit card - they’ll charge a fee between $2 and $5 to verify that it is yours, similar to how Google checks your credit card details for an AdSense account - and by sending a 6-digit code to your postal address which you have to enter to verify your identity on their platform. Other than the small setup fee, the service is free of charge. Read More...

Friday, March 27, 2009

Plan to introduce biometric IDs stirs privacy debate.

By Shahar Ilan

Tags: Sheetrit, Knesset

No other democracy has yet introduced biometric identity cards, which Israel recently decided to do, and the only nondemocracy to have done so is Hong Kong, according to a study by the Knesset's research center.

One reason for this reluctance is that biometric identity cards require establishing a centralized database with biometric data on every citizen and legal resident of the country.

Biometric passports, in contrast, are becoming more common in the West. However because people can choose whether or not to obtain a passport, which is not true of ID cards, this is considered less problematic from the perspective of privacy. Read More...

Belgium expanding electronic ID program to children

The Belgian government is expanding it’s electronic identification card initiative to include all children under the age of 12. The program consists of a dedicated electronic ID with specific features intended to increase their security in emergency situations.

In particular, a special hotline number is printed on the card body of the child’s ID card so that his parents can be alerted as soon as possible. Zetes is the systems integrator for the project and Gemalto is providing the smart cards.

The size of a credit card, the new Kids-ID card features three main functionalities. Firstly, it acts as an electronic national ID credential for Belgian children and also serves as an official travel document in most European countries. It contains all ID information as well as the child’s photograph. This data is printed on the card body and also stored in the microprocessor. 


Read More...

The software behind the ID card printers

Wednesday, February 11, 2009 - CR 80news

Today’s ID cards do far more than just present a name and face. They can conduct financial transactions, enable you to log on to your PC and access networks, track time and attendance as well as grant building access.

In addition, ID cards are an important extension of an organization’s image and brand. Consequently, those charged with designing and activating ID cards for their organizations have a pretty big responsibility.

“Effectively personalizing ID cards involves more than meets the eye,” says Steve Lohman, product marketing manager at HID Global. “For most organizations, it’s not just about creating a visually attractive card. It’s also about appropriately enhancing security while ensuring the effectiveness of the entire card program.”

Every type and size of organization has different needs for their ID card program. Educational institutions, for example, can have a wide range of security requirements. At the most basic level, these institutions may simply be looking for a single, easy-to-use ID badge to provide the ability to quickly identify those who belong in school and those who don’t.

Some institutions, however, may choose to have the cards control access to facilities, restricted areas and equipment throughout the campus and enhance operations such as library check-out and financial transactions. They also need the ability to easily replace lost or damaged badges.

This is where a card personalization software package, such as Asure ID 2009 from HID Global, or Magicard ID from Magicard, can help. Read More...

Zebra unveils QuikCard ID Solution

Tuesday, March 24, 2009 in ID News
Zebra Technologies, a Vernon Hills, Ill.-based printer manufacturer, has launched its QuikCard ID solution, an all-in-one integrated program for entry-level card applications designed for small- to mid-size businesses and colleges and universities.

The QuikCard ID system combines the company’s value class printers with card design software and design templates that enable users to design, print and issue color photo ID cards for a variety of applications, including access control badges, visitor ID management and retail loyalty and membership cards. This solution also works for educational, state and local government, public safety agencies and nonprofit associations.

Package components include a Zebra P110i or P120i card printer, QuikCard ID Software, a Logitech USB Web cam and mini-tripod and a starter kit with a ribbon and 200 PVC cards. Contact: Security Imaging for all you ID badge needs.

Monday, March 23, 2009

Race Camcorder - Video your on track recklessness

This Race Camcorder is great for reviewing your line around the track. Take a look at this short video using this cam, it is attached to a CRG racing go kart.
Footage is bumpy since their are no shocks to absorb vibration.
Footage is recorded to a SD memory card for easy computer download. Camera also records sound and has a LED screen for easy playback.

This video race camcorder has fantastic optics.

Video cam sits into a CNC made housing built by Squires Machine.
RHR Racecam with CNC housing - Price $250.00

If interested in purchasing your own race camcorder contact:

Rod Helmuth
Squire’s Machine
Lynnwood, WA
206-285-7110

Mainstream Media Acknowledges The National ID Card

Here is some videos I have found regarding Real ID. Take a look tell us what you think?
More videos:
U.S. unveils national I.D. plan
National ID Card
ID Cards, security or control?

Friday, March 20, 2009

A Song for Tough Economic Times:

Seattle Teen Encourages People to “Don’t Give Up” on Debut CD


FOR RELEASE:
IMMEDIATE



Seattle, March 20, 2009 -- Seventeen-year-old Amy Helmuth thinks big. So when the young singer first heard “Don’t Give Up,” she saw it not just as a catchy pop tune, but as a message to people struggling through our country’s current economic crisis.

“I hope the song puts a smile on people’s faces,” said Helmuth, who recorded the song by Dalona Foster and Chelsi Lee Marie for her debut, four-single CD, “Don’t Give Up.”

When Helmuth first heard the song in the recording studio, she couldn’t help but smile. “The beat made me bounce in my seat,” she said. Helmuth knows that no song can make up for losing a job or home, or both, but she hopes its message will give people a sense of hope—or at least help them forget their troubles for a while.

At just five feet tall, Helmuth hardly looks like someone who could take on such a big challenge. What this petite high school junior lacks in height, though, she makes up for in spunk. “I’m a little person, but I don’t let anybody push me around,” she said.

A student at Roosevelt High School in Seattle, Helmuth has been active in musical theater since second grade. She has performed in numerous productions with Broadway Bound Children’s Theater. She wrote her first song, “You’re Near,” in 2007 after losing several loved ones within months of each other.

In addition to the title track “Don’t Give Up,” Helmuth’s CD includes “You’re Near,” “Rendezvous” and “Queen.” To sample her music, purchase the CD or buy MP3 downloads of any of the songs, visit Helmuth’s web site, www.amyhelmuth.com. The CD costs $6.50 (shipping included). Downloads are 99 cents per song. Copies of the CD are also available at Silver Platters—Northgate, 9560 1st Ave. N.E., in Seattle.

FOR MORE INFORMATION, CONTACT:
Amy Helmuth
Email: Amy@amyhelmuth.com
Website: www.amyhelmuth.com

More information about Amy Helmuth
Amy is a young, talented, and inspirational artist emerging from the Seattle area whose demo began attracting attention within weeks of its release! If you like the hottest in new pop music, but also hunger for authenticity and a great story in the music, then you should definitely give this teen’s tunes new demo compilation “Don’t Give Up” a spin on your player!

Attending Roosevelt High School in Seattle, Amy is now dreaming of attending college in New York and getting degrees in performing arts and graphic design. She keeps herself busy not only with music and theater, but also volunteering at the “Ruby Room” (an agency that provides formals gowns to girls who are unable to purchase their own). Amy has been continuously active in theater and music since she was a little girl and maintains these theatrical talents to this day while expanding into professional singing as well. In elementary school, Amy was in her first play and got the role of “talking tree” and ever since that moment she knew that performing arts and music would be her calling. She has been in multiple plays at a wide range of venues over the past years acting and singing in several very well known productions including Broadway Bound’s “The Wizard of Oz” featured as Dorothy, and "High School Musical" where she was featured as Gabriella. Amy was also recently a featured singer in her high school cast of “Cats”.

Though she is only 17 and does not yet have her first full length album, Amy is more than well on her way. “You're Near”, a very moving tune off her new 4 song demo, received airplay in Seattle shortly after its release in late 2008. The song was also the featured song on The Memorial Music Library Homepage at www.memorialmusiclibrary.com for several months in 2008. “Rendezvous,” an up tempo and flirty love song was recently featured on the Ron and Don Show “Make or Rake the Band”. Recently, Amy even scored high enough through Everett’s “Aquasox Idol” to sing the national anthem at an upcoming Sox game this 2009 season. It seems the opportunities just keep coming and this vivacious artist grabs hold to each one!

Amy performed her first official concert of her own original music for a packed out house at the infamous Brick in Roslyn, WA and left the crowd wanting more! Amy is in the process of building a professional band with her producer/manger in Seattle and is also heading back to the studio to record again this summer. Her upbeat personality and quirky sense of humor make her easy to be around and easy for audiences to relate to. Amy is now in search of her own record label and with the contagious vibe her demo presents it seems a likely outcome. Her song “Don’t Give Up” is an inspirational masterpiece in these tough economic times and will also be her motto as she pursues what will likely become a very “mainstream” career in the music industry and theater business.

The iPhone as a student ID card?

March 16, 2009 in "CR80 News"

The iPhone as a student ID card? That may be next at Stanford University, Palo Alto, Calif., which, thanks to an entrepreneurial firm created by Stanford students has already produced a suite of iPhone applications that include the university’s course catalog, campus map and other resources.

Called iStanford, the application suite was rolled out in October and has already garnered national attention, including winning the $10,000 grand prize for AT&T’s “Big Mobile on Campus” contest for best smart phone application. One of the student members of the firm said he would also like to see the iPhone replace student identification cards sometime in the future.

Read more...

Lost ID card? It will cost you...

by Andy Williams, Contributing Editor "CR80 News"

While some students may complain when they have to fork over money for a replacement student ID card that was originally free, most have little choice if they want to keep availing themselves of the university’s services.

Still, CR80News wondered what was the going rate for lost or stolen cards. We interviewed 20 campus card administrators and discovered that replacement rates vary widely, from as little as $5 a card to $25. Some even had varying rates, depending on whether this was the first, second or third time a student may have lost his card, or whether he was trying to replace a simple mag stripe card or one with more advanced technology on it.

The responses from campus card administrators pretty much track a “Benchmarking Survey” conducted six years ago by the National Association of Campus Card Users, which listed universities charging from $5 to more than $25 for a lost or stolen card. Two thirds of universities responding charged either $10 or $15. Keep in mind these are six-year-old figures. Read More

Tuesday, March 17, 2009

3 Styles Of Lanyards To Place Your ID On

If your job requires you to have some type of badge or identification card you are going to want a lanyard. Lanyards are worn around your neck and are a convenient way to display your ID. Lanyards come in various styles and are made for short term or long term use. Here are three different styles you may want to consider for displaying your badge: Vinyl Neck Tubes/Straps, Beaded Chains and Elastic Neck Cords.

Vinyl Tubes/ Neck Straps
Vinyl tubes and Neck straps are terrific if you are looking for an economical way to display your employee Id badge. The vinyl is soft and won’t irritate the skin. These lanyards are great for food service workers because the vinyl can easily be wiped down.

You can have your vinyl strap custom imprinted with your company information allowing you to promote your company and wear your ID badge while still keeping your costs low.

Beaded Neck Chains
Beaded lanyards can be a fun way to hang your id badge. Beaded chains are popular with the Military who use them to display their dog chains, they are also popular for special events or conventions. Beaded neck chains are available in nickel-plated steel or in plastic. Metal Chains have a metal connector and the plastic chains sometimes give you an option of either metal or plastic connectors.

Beaded Chains can also be made with glass beads, shells or pearls and are a popular option for woman who want to fashionably display their ID badge. These fashion chains are available with a key ring at the end so you can display your badge or use it for keeping your keys handy.

Elastic Cords
Elastic neck cords have metal barbs and stretch around the neck to be connected to a badge holder that has chain holes. Some elastic cords even come with the a pre-punched holder attached. These Elastic Lanyards are extremely cost efficient and are great for conventions or special events.

Lanyards have many options to choose from in regards to material, style and options. Neck Cords can be made for long term wear or for short term use at special events, they can be customized to promote your company or be used for giveaways. Having your ID badge handy and easy to read is a top priority for most companies that's why it’s worth taking the time to find the right style of lanyard.

Wednesday, March 11, 2009

The Ron & Don Show - Rake The Band Competition

The Ron & Don Show - Amy Helmuth Interview

If you like my song "Rendez-vous" please give me a vote.

Where two FM radio stars tell you your band's no good!

It's another round of Ron & Don: Make or Rake the Band. Give them a listen then scroll down to tell us who you think is best. The winner for each week will be entered to play LIVE on the Ron and Don Show's Friday Happy Hour at the end of the month!
Visit Amy's Website...

Friday, March 6, 2009

Tempbadge Products - Expire time badges

Tempbadge - Expiring badges for visitor management -Temporary ID cards for contracted workers.



Tempbadge id badges are time expiring badges that expire in 4 different time frames - 1/2 day, 1 day, 1 week and 1 month. These expiring badges are designed to help identify visitors, contractors and temporary workers.

Everyone that enters your building should wear an Identification badge. Permanent employees are usually issued access control badges or PVC badges, but what happens when visitors come to your location?

Tempbadge id products are a great solution! The time expiring badges are low costs and easy to issue.

Purchase visitor management software that keeps track of visitors and their length of stay. Passage Point software works with temporary badges and permanent pvc badges and allows you to identify undesirable visitors through photos or other alerts, as well as help with emergency evacuations. Passage point software can also communicate to staff current threat levels or policies.

Security Imaging offers tempbadge manual sign in systems for those who want an economical badging solution. Log sheets are available for sign in and the information on the log sheet is then transferred onto a temporary time expiring id badge.

School Security Systems are also available. School Expiring visitor badges are a great way to keep your volunteers and substitute teachers badged.



Download our Tempbadge Catalog to view part#’s and photos of some of the products available. If you have any questions please call us and we can help you find the best solution for your needs. Tempbadge products are not available for purchase online because the complicity of the product itself, our staff will be happy to take your order and will also be able to further explain how to use the product at time of purchase.

Badge Reels - Medical ID Badge Supplies

Medical Badge Reels - ID Reels
If you work in a hospital it is mandatory you wear an ID badge to help identify your position. Your ID card probably also allows you into secure areas of the hospital, as well as entrance doors and secure elevators. Its important to always have your id badge handy and ready to be scanned at any time.

Security Imaging now sells badge reels that are geared toward the medical industry. Badge reels allow you to attach your access card and they extend to card readers for easy access.



Nurse Badge Reel


Stethoscope Badge Reel


Caduceus Badge Reel